Lash & Brow Kit - How to Use

**RECOMMENDED THAT A PATCH TEST IS UNDERTAKEN 48 HOURS BEFORE USE**

Beauty Loft will take no responsibility for any adverse reactions caused following use of this product. 


Lash Lift (only)

  1. Gently apply the cleanser with use of a cotton pad or tissue to remove any residue 
  2. Separate the top and bottom lashes by placing under eye pads on the lower eyelids, ensuring all bottom lashes are covered. 
  3. Select the appropriate size lash lift pads to match the length of your lashes. Tip: Smaller the size, the bigger the curl 
  4. Apply the glue to the back of the lash lift pads, wait for approx 20 seconds and then place onto your eyelids, as close as possible to your lash line. 
  5. Apply the glue to the front of the lash lift pads and use the Y brush to lift the lashes from the root onto the lash lift pad. Tip: No need to overdo it on the glue, just wait 30-60 seconds for it to dry before placing the lashes down onto it. 
  6. Carefully apply the perm lotion onto the eyelashes (avoid getting perm lotion on skin). Allow between 10-12 minutes for this to work. Tip: we recommend covering your eye with a plastic wrap to allow for lotion to fully dry within sufficient time. 
  7. Slowly & delicately remove the perm lotion with your Y brush and apply the fixing agent onto your eyelashes. Allow between 10-12 minutes for it to dry. Tip: we would again recommend that you cover it with a plastic wrap. 
  8. Use the cleanser and Y brush to clean all remaining residue off lashes. Remove the lash lift pads from the upper part of your eyelid and apply the nutrition lotion to the lashes to add final nourishment.
  9. Voila! All done.  

Lash Lift + Tint

  1. Complete all steps as listed above with the exception of applying the nutrition lotion. This will be applied after you have tinted them. 
  2. Mix a drop of the cream dye and a drop of the cream oxidant (developer) together.
  3. Place the eye pads as close as possible to the lower lash line without covering lower lashes. Once you have mixed the dye and oxidant, apply it to the lower lashes with a brush. 
  4. Once lower lashes are complete, repeat the same process to the upper lashes; from the base to the tip of the lashes. 
  5. It is advised that you wait approximately 15 minutes until the dye has fully taken affect. 
  6. Once the 15 minutes are complete, carefully remove any left over dye by gently wiping it onto the eye pads. Once the eye pads are removed, brush through the lashes with the Y brush and a small amount of cleanser. 
  7. Finally, you can apply the nutrition lotion to the lashes to add the final nourishment they will require.
  8. Volia! Lift and Tinting all complete! 

Eyebrow Tint 

  1. We recommend that prior to applying any dye to your eyebrows, you ensure they are shaped how you desire to guarantee the perfect finish once the tinting process is complete. 
  2. We would also suggest that you apply some skin protection cream such as Vaseline to the surrounding areas of your eyebrows to prevent any stains form the dye affecting the surrounding skin. 
  3. Mix two small drops of the oxidant (developer) and one drop of the eyebrow dye together. Stir well with a brush. 
  4. Once stirred, spread evenly over your eyebrows and ensure full coverage (without leakage). 
  5. Leave on for 10 minutes maximum.
  6. Once left for 10 minutes, wipe off any remaining residue with the cleanser and brush through your brows with a clean brush. 
  7. Voila! Eyebrow tinting process complete.